RG-RSR77-XA-03 5 RU Multiservice Core Modular Router
The RG-RSR77-XA-03 series is mainly used as the core or aggregation node on a WAN of the government, finance, carrier, education, or large- and medium-sized enterprise network, egress of a large campus network, and an edge aggregation node of a data center.
Models
Series
Highlight Features
- A modular design with various expansion card interfaces, supporting rates ranging from 2 Mbps to 100 Gbps.
- Support for Segment Routing over IPv6 (SRv6), simplifying protocol configuration and facilitating quick service rollout.
- Redundancy for critical components, ensuring uninterrupted services and improving overall reliability.
- Y-shaped airflow design, improving cooling efficiency and lowering energy consumption.
Multiservice Core Router RG-RSR77-XA-03
The router supports eight line card slots and 32 subcards and offers high-density GE, 10GE, and 100GE ports. This series is designed to fit into cabinets with a depth of 600 mm (23.62 in.), saving approximately 30% of space compared to similar products in the industry.
Appearance
Dimensions
A Modular Design with Various Subcard Ports, Supporting Rates Ranging from 2 Mbps to 100 Gbps
Line cards include main cards and subcards. The subcards support multiple types of ports, including E1, POS, GE, 10GE, and 100GE ports. You can install subcards as needed to meet different networking requirements.
Support for SRv6, Simplifying Protocol Configuration and Facilitating Quick Service Rollout
Segment Routing over IPv6 (SRv6) is a next-generation IP transport protocol based on IPv6. SRv6 simplifies and consolidates traditional complex network protocols, lowering the O&M threshold. SRv6 devices can be deployed alongside IPv6 devices so that existing networks can achieve better compatibility and support quick rollout of a large number of services.
MPLS
SRv6
Redundancy for Critical Hardware Components, Ensuring Uninterrupted Services and Improving Overall Reliability
A redundant design is adopted for key components, such as the supervisor engine, switch fabric module, and power supply module. All modules support hot swapping, reducing the risk of device failures and service interruptions, and significantly enhancing system reliability.
If the active routing engine fails, the data or service is switched to the standby routing engine within seconds. Hot swapping is supported for the active and standby engines, ensuring zero packet loss.
The router supports AC/DC power supply redundancy and hot swapping, ensuring uninterrupted power supply.
Y-shaped Airflow Design, Improving Cooling Efficiency and Lowering Energy Consumption
The side-to-rear Y-shaped airflow design creates a three-dimensional heat dissipation channel, increasing the airflow by 30% and enhancing the overall efficiency of heat dissipation. Independent airflows of line cards and switch fabric modules,
improving the heat dissipation efficiency and achieving a minimum power consumption of 0.5 W per gigabyte of data transmission.
FAQ
Documents
RG-RSR77-XA Series Routers Datasheet
Ruijie RG-PA300, PA460 Series Power Model Datasheet (V1.0)
Ruijie RG-RSR77-XA Series Routers RGOS 12.6(1)B0905 Command Reference (V1.0)
Ruijie RG-RSR77-XA Series Routers Firmware
RG-RSR77-XA-03 RG-RSR50-XA-12 Ruijie CE DOC
Ruijie RG-RSR77-XA Series Routers Release Notes, RGOS 12.6(1)B0905 (V1.0)
Ruijie RG-RSR77-XA Series Routers RGOS 12.6(1)B0905 Configuration Guide (V1.0)
Specifications
Hardware Specifications
| Hardware Specifications |
RG-RSR77-XA-03 |
RG-RSR77-XA-08 |
| Interface Specifications |
||
| Power module |
4 (N+N redundancy) |
|
| Fan module |
1 |
2 |
| Fixed management port |
1 x console port, 1 x MGMT port, and 1 x USB port |
1 x console port, 1 x MGMT port, and 1 x USB port |
| Supervisor module slot |
2 |
2 |
| Switch fabric module |
2 x integrated switch fabric modules |
4 x independent switch fabric modules |
| Service module slot |
3 |
8 |
| Line card slot |
12 |
32 |
| System Specifications |
||
| Switching capacity |
1.2 Tbps |
3.2 Tbps |
| ARP table size |
40,000 |
40,000 |
| Number of IPv4 unicast routes |
2,000,000 |
2,000,000 |
| Number of IPv4 multicast routes |
8,000 |
8,000 |
| Number of IPv6 unicast routes |
1,500,000 |
1,500,000 |
| Number of IPv6 multicast routes |
4,000 |
4,000 |
| Number of ACEs |
32,000 |
32,000 |
| Dimensions and Weight |
||
| Dimensions (W x D x H) |
442 mm x 560 mm x 220 mm (17.40 in. x 22.05 in. x 8.66 in.), 5 RU |
442 mm x 560 mm x 442 mm (17.40 in. x 22.05 in. x 17.40 in.), 10 RU |
| Weight (empty chassis and fan modules) |
12.5 kg (27.56 lbs) |
43.55 kg (96.01 lbs) |
| Power and Consumption |
||
| Maximum power consumption |
40 W |
60 W |
| Maximum output power |
RG-PA460-RI: 90 V AC to 290 V AC, 460 W |
RG-PA1600I: 90 V AC to 176 V AC, 1200 W 176 V to 290 V AC, 1600 W
RG-PD600I: 600 W |
| Rated input voltage |
● AC: 100 V to 240 V AC, 50 Hz to 60 Hz |
● AC: 100 V to 240 V AC, 50Hz~60Hz ● DC: –48 V to –60 V DC |
| Maximum input voltage |
● AC: 90 V AC to 290 V AC, 45 Hz to 65 Hz |
● AC: 90 V to 290V AC, 47Hz~63Hz ● DC: –38 V to –75 V DC |
| Environment and Reliability |
||
| MTBF |
216,000 hours |
342,000 hours |
| Primary airflow |
Fans drawing air for forced convection |
Fans drawing air for forced convection |
| Operating temperature |
0°C to 45°C (32°F to 113°F) |
|
| Storage temperature |
–40°C to +70°C (–40°F to +158°F) |
|
| Operating humidity |
10% to 90% RH (non-condensing) |
|
| Operating noise |
Ambient temperature ≤ 70 dB Maximum noise < 77 dB |
35°C (95°F): 60 dB 50°C (122°F): 75 dB |
Software Specifications
| RG-RSR77-XA Series |
|
| Model |
Description |
| Ethernet switching |
Jumbo frame length: 1,578 bytes |
| 802.3az EEE |
|
| LLDP/LLDP-MED |
|
| IP service |
Static and dynamic ARP |
| DHCP server, DHCP relay, and DHCP client |
|
| FTP, TFTP, FTPv6, and TFTPv6 |
|
| NTP, SNTP, and NTPv6 |
|
| NAT |
|
| Strict and loose RPF uRPF ignoring default routes |
|
| ND |
|
| FTP, TFTP, FTPv6, and TFTPv6 |
|
| DNS |
|
| IPv4/IPv6 VRF |
|
| DHCP server, DHCPv6 client, and DHCPv6 relay |
|
| ND and ND snooping |
|
| IPv6 GRE tunnel |
|
| IP routing |
IPv4 and IPv6 static routing, and static blackhole routes |
| RIP v1/v2 and RIPng |
|
| OSPFv2 and OSPFv3 |
|
| IS-ISv4 and IS-ISv6 |
|
| BGP and BGP4+ |
|
| Routing policies |
|
| BGP4, BGP4+, and MP-BGP |
|
| IPv4 VRRP v2/v3 and IPv6 VRRP v3 |
|
| IPv4 and IPv6 PBR |
|
| Multicast |
IGMP v1/v2/v3 |
| Static multicast routing |
|
| PIM-DM, PIM-SM, PIM-SSM, PIM-SSMv6, PIM-SMv6, and other multicast routing protocols |
|
| MSDP for inter-domain multicast |
|
| MLDv1/v2 |
|
| MPLS/SR |
Basic MPLS functions |
| MPLS forwarding |
|
| 6PE/6VPE interconnection with IPv4/IPv6 MPLS backbone network |
|
| MPLS MIB (RFC 1273, 4265, 4382) |
|
| L3VPN |
|
| LSP |
|
| LDP |
|
| ACL and QoS |
Standard IP ACLs |
| Extended IP ACLs |
|
| Extended MAC ACLs |
|
| IPv6 ACLs |
|
| Applying ACLs to interfaces |
|
| MPLS QoS |
|
| HQoS |
|
| Security |
Multiple AAA modes |
| RADIUS authentication, authorization, and accounting |
|
| TACACS+ |
|
| Attack defense |
|
| Password security |
|
| RNFP |
|
| CPP |
|
| FPM |
|
| PKI |
|
| IPsec VPN |
|
| VPDN |
|
| SSHv1 and SSHv2 |
|
| Global IP-MAC binding |
|
| Login authentication and password security |
|
| Reliability |
BFD |
| GR |
|
| DLDP |
|
| ECMP |
|
| NSR |
|
| Hot swapping |
|
| NMS and maintenance |
SPAN and ERSPAN |
| SNMP v1/v2/v3 |
|
| System operation logging |
|
| IPFIX |
|
| Command line configuration through console, AUX Modem, Telnet, and SSH |
|
| RMON (1, 2, 3, 9) |
|
| NETCONF |
|
| CWMP |
|
| gRPC |
|
Note: The item marked with the asterisk (*) will be available in the future.
Order Information
Chassis and Supervisor Engines
| Model |
Description |
| RG-RSR77-XA-03 |
RG-RSR77-XA-03 chassis |
| RG-RSR77-XA-08 |
RG-RSR77-XA-08 chassis |
| RSR77-XA-03-CM |
RG-RSR77-XA-03 routing switching engine |
| RSR77-XA-08-CM |
RG-RSR77-XA-08 routing engine |
| RSR77-XA-08-DSF |
RG-RSR77-XA-08 switch fabric module (40 Gbps supported by a single switch fabric module) |
| RSR77-XA-08-DSF II |
RG-RSR77-XA-08 switch fabric module (200 Gbps supported by a single switch fabric module) |
Power Modules
| Model |
Description |
| RG-PA1600I |
RG-RSR77-XA-08, 1600 W AC power module |
| RG-PA460-RI |
RG-RSR77-XA-03, 460 W AC power module |
| RG-PD600I |
RG-RSR77-XA-08, 600 W DC power module |
SIP Carrier Card
| Model |
Description |
| RSR77-XA-SIP3 |
NM/DNM carrier card (four NM modules or two DNM modules supported by each RSR77-XA-SIP3) |
| RSR77-XA-SIP6 |
Enhanced carrier card, supporting 2 x DNMX cards |
NM Line Card
| Model |
Description |
| NM-2XS-KA |
2-port 10GE Ethernet interface module, requiring additional SFP+ modules |
| NM-4XS-KB |
4-port 10GE Ethernet interface module, requiring additional SFP+ modules |
| NM-8SFP-G |
8-port 1GE Ethernet optical interface module, requiring additional SFP modules |
| NM-8GT-G |
8-port 1GE Ethernet electrical interface module |
| NM-8E1/CE1 |
8-port E1/CE1 interface module, requiring adapters and adapter cables |
| DNM-1CQ-KC |
1-port 100GE/40GE Ethernet interface module |
| DNMX-20XS |
20-port 10GE Ethernet interface module, requiring additional SFP+ modules |
| DNMX-20SFP |
20-port 1GE Ethernet optical interface module, requiring additional SFP modules |
| DNMX-24GT |
24-port 1GE Ethernet electrical interface module |
| DNMX-4CQ |
4-port 100GE/40GE Ethernet interface module, requiring additional SFP+ modules |
Note: The item marked with the asterisk (*) will be available in the future.
